SFP-10G-SR Vs. SFP-10G-LR
10G SFP+ optical transceiver is considered as the mainstream form factor of the 2017 market due to its matured technology and lower price, even although 40G/100G optical modules are on the very top trend for enterprise and data center for the interconnection. 10G SFP+ modules come in several standards: SFP-10G-SR, SFP-10G-LR, 10GBASE-ER SFP+, and 10GBASE-LRM SFP+. This article will offer details about the difference between SFP-10G-SR and SFP-10G-LR.
SFP-10G-SR is compliant with 10GBASE-SR standard. The Cisco 10GBASE-SR module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber, up to 300m link lengths over OM3 and 400m link lengths over OM4 cables.
Cisco SFP-10G-SR transceiver is hot-swappable input/output device which allows a 10 Gigabit Ethernet port to link with a fiber optic network. Because it is hot-swappable and MSA compliant, the Cisco SFP-10G-SR transceiver can be plugged directly into any Cisco SFP+ based transceiver port, without the need to power down the host network system. This capability makes moves, add-ons and exchanges quick and painless. The data sheet of SFP-10G-SR is as follows:
The Cisco SFP-10G-SR series consists of two other modules: the Cisco SFP-10G-SR-S Module and the Cisco SFP-10G-SR-X Module.
The Cisco SFP-10G-SR-S module belongs to the Cisco S-class optics that possess the same performance with Cisco SFP-10G-SR module. For the detailed information about the difference between Cisco S-class and non S-class optics, you can review the previous article.
The Cisco 10GBASE-LR module supports a link length of 10 km on standard single-mode fiber. Compliant with 10GBase-LR standard, SFP-10G-LR can support up to 10km over single-mode fiber and uses 1310nm lasers. There is no minimum distance for LR, either, therefore it is suitable for short connections over single mode fiber, too. The following image shows a Cisco Compatible SFP-10G-LR SFP+.
10GBASE-LRM is the type of transceiver that customers may easily feel confused with 10GBASE-LR SFP+ optics. However, in short, 10GBASE-LRM SFP+ still uses the 1310nm lasers, but it can only reach up to 220 m over standard multimode fibers (OM3/OM4). The 10GBASE-LRM can be packaged in XFP and SFP+ form factors.
Besides the Cisco SFP-10G-LRM, there are a new type of the 10G SFP+ module for multimode fibers—SFP-10G-LRM2. It is a type of SFP+ transceivers compatible with the 10GBASE-LRM standard. SFP-10G-LRM2 can reach up to 2km over standard multimode fiber.
Do You Need Cisco Original Brand or Compatible SFP+ Modules?
If you spend a large sum of money on the Cisco original brand switch, next you may think of buying the compatible optics. However, there comes the problem, do I need the Cisco original brand modules?
To tell the truth, not every SFP+ modules can work well on the Cisco switch SFP+ ports. You must make sure of the compatibility before plugging the SFP+ transceivers on it. Furthermore, SFP+ modules are the essential components of fiber optic network, usually, network installers need a bunch of them for your network deployment. Thus, select cost-effective 3rd party modules are necessary. You can also purchase more for back up.
FS.COM, as a reliable and qualified fiber optics supplier, supplies a full range of optical transceivers with a large quantity of products available in stock. Our compatible Cisco SFP-10G-SR and SFP-10G-LR modules are provided at really low price. Cisco SFP-10G-SR is $16, and SFP-10G-LR is $34.
SFP-10G-SR is mainly used for short-reach 10G application, while SFP-10G-LR, with a link length of 10 km is ideal for metro infrastructure. Customers can choose either reliable SFP-10G-SR or SFP-10G-LR, according to their own needs.